Hearing Aid Troubleshooting Tips

Hearing aids may be small in size, but they have the amazing capability to enhance sounds for anyone who is suffering from hearing loss. Most people who wear hearing aids depend on them on a daily basis, so if it is not working properly there can be major problems. But before you decide to take your hearing aid in to be repaired, there are several troubleshooting measures you can take. If you think that your hearing aid is not working as well as it should, try the following:

Make Sure your Hearing Aid Is Dry

Excessive moisture is one of the main causes of hearing aid malfunction, so it is important to keep your hearing aid as dry as possible. Before you take your hearing aid in to be repaired, give it a chance to completely dry out; don't forget to open the battery compartment and remove the battery at night so you can ensure that this area is dry as well. You may want to make a small financial investment in a hearing aid dehumidifier, which does an excellent job of removing moisture from a hearing aid and keeping it dry.

Clean Your Hearing Aid

Since many hearing aids are worn inside the ear, it is not uncommon for earwax to become trapped in the small spaces in the device. Use a soft cloth or tissue to remove wax and debris from the outside, and then use a hearing aid brush to remove anything clogging the small holes of your device. If you think that your hearing aid is particularly dirty, you can take it to a hearing medical care provider for a professional cleaning service. In addition to cleaning your hearing aid, make sure that you keep your ears clean. Removing excess earwax can prevent it from becoming lodged in the hearing aid.

Check the Battery

While most hearing aid batteries last for a long time, they are not able to power a hearing aid forever. If you find that your hearing aid is not working at all, it is worth removing the battery and trying to replace it with a fresh battery. If this does not remedy the problem, you may need to have your hearing aid repaired.

Make Sure the Hearing Aid Is Turned On

This may sound like common sense, but it is not uncommon for hearing aids to be accidentally switched off when the user is putting them in or taking them out. This is especially true for new hearing aid users who are getting used to wearing the devices. If your hearing aid is on but not providing the sound amplification that you are used to, you may also want check the volume level to make sure that it has not accidentally been adjusted. For any questions, talk to a hearing aid repair specialist.


Share